Septic tank problems are actually very devastating in nature. Septic tanks belong to components of every mini sewage system. Government as well as private organisations usually have sewage systems built in most urban settings. This is usually different when it comes to rural areas. Sewage systems are inaccessible in these areas and as a result, people make use of septic tanks to handle problems related to waste disposal.
Due to the fact that toxic wastes are transported by septic tanks, there are lots of problems which are usually experienced. Foul odour can get redirected to any home especially when it is faulty. This can make the occupants prone to diseases and infections. It can also lead to a situation of discomfort. The skill to have septic tanks repaired is something that is can be very important during times of emergency.
One of the major problems with the septic tank is the issue of clogging. Such could be as a result of animals, or debris that has hardened. There is likely to be blockage when toilets don’t seem to flush very well. There is also the issue of bathtub not getting drained. In such cases, the septic tank will begin to develop problems. The very first step that you should take is to ensure removal of anything that is blocking the septic tank pipes.
Table of Contents
What are Ways to Fix Septic Tank Problems
Step 1: Having the Object Dislodged
Purchase a plumber’s snake from any of the tools shop that is around you. Have it run down the pipe to ensure that the object is dislodged.
Step 2: Assessing the Septic Pipe
There are times the above step may not work. If such should happen then it is high time you carried out some digging. Have the septic tanks lid opened in other to check the liquid’s level. If it happens to be the house’s inlet, then such blockage is at the end of the inlet. The object can be dislodged using water with pressure.
Step 3: Having Drain Pipe Checked
The drain can be blocked by debris that are large and can’t get out. There are instances when plants can even start to grow there. In this case, blockage pipes should be cut into pieces with the aid of a rooter tool. After that, you will see that the pieces should be able to flow alongside the water.
Step 4: The Lid of Septic Tank Should Be Checked
The lids of septic tank will definitely crack after some period of time. This is because they are made of concrete. Having them replaced can be an expensive option. The best option is to have it repaired.
Step 5: Having the Lid Scrapped
This involves the use of screwdriver to ensure that debris is removed. You will also need wire brush to ensure that hard debris is removed. This should be until you are sure that the lid is smooth.
Step 6: Having Cracks Repaired
To get this done, you will need a crack filler. The recommended one is concrete epoxy. Have the ingredients mixed just as you must have been directed in the kit. After that, get water and sand and mix them with it inside a bucket. After that, you can then start applying the filler o the areas which are showing signs of crack. You will need to wait for some time until it is fully dried.
Need help fixing your septic tank? Get in touch with one of our experience Cape Town Plumbers today.